Electronic Cruise Control
Cruise Control Bowden Cable, Remove and Install
Remove, Disconnect
In LHD vehicles: Remove brake servo - see operation "Brake Servo, Remove and Install (LHD Vehicles)"in group "H".
Remove retainer (1).
Prise off accelerator Bowden cable from ball head (2).
lever off retainer and remove cruise control Bowden cable from ball head (3).
Remove cruise control Bowden cable from retainer by pressing catches (arrows) together.
Disconnect cruise control Bowden cable from actuator by rotating the guide tube 1/4 turn to left.
Detach cruise control Bowden cable on actuator (arrow).
Install, Connect
Attach cruise control Bowden cable to actuator and screw to actuator with 1/4 turn to right.
Install cruise control Bowden cable in bracket and allow to engage.
Connect cruise control Bowden cable to ball head and fasten with retaining ring.
Attach accelerator Bowden cable to ball head and secure with retaining clips.
In LHD vehicles: Install brake servo - see operation "Brake Servo, Remove and Install (LHD Vehicles)" in group "H".
Remove, Disconnect 
Install, Connect 