Instrument Panel Center Trim Panel Replacement
Removal Procedure
2. |
Unclip the transmission
control lever boot (1) from the front floor console. |
3. |
Remove the instrument panel
center trim panel screws (1). |
4. |
Unclip the instrument panel
center trim panel on both sides. |
5. |
Unclip the instrument panel
center trim panel in the shown direction. |
6. |
Unclip the instrument panel
center trim panel at both upper clip points in the shown direction
(arrows). |
Installation Procedure
|
Note: The clips will
make an audible click when fully engaged.
|
1. |
Clip in the upper two clips
(arrows). |
2. |
Install the instrument panel
center trim panel. |
3. |
Clip in the instrument panel
center trim panel. |
4. |
Install the instrument panel
center trim panel screws (1). |
5. |
Clip in the transmission
control lever boot (1). |
|