vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Brake Pedal Position Sensor Calibration > < Headlamp Leveling Rear Suspension Height Sensor Replacement

Astra J

Headlamp Leveling Rear Suspension Height Sensor Exciter Plate Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

           2372549



2. Remove headlamp leveling rear suspension height sensor exciter plate (2).
3. Remove headlamp leveling rear suspension height sensor exciter plate bolt (1).

Installation Procedure


           2372548



1. Install the headlamp leveling rear suspension height sensor exciter plate (1).

Caution: Refer to Fastener Caution .

Note:  The headlamp leveling rear suspension height sensor exciter plate (1) needs to be pushed forward (arrow) during assembly and fastening of the bolt.
2. Install the headlamp leveling rear suspension height sensor exciter plate bolt and tighten to 9 N·m (80 lb in) .
3. Lower the vehicle.
4. After repairs, refer to Control Module References for programming and set up procedures.
5. Aim the headlamps after installation. Refer to Headlamp Aiming .

Brake Pedal Position Sensor Calibration > < Headlamp Leveling Rear Suspension Height Sensor Replacement